Image
image
image
image


 

Audio Mixers

Graham-Patten D/ESAM IV Audio Mixer Protocol
(
57KB, 6 pages)
Document covering the D/ESAM IV protocol developed by Graham-Patten Systems and available for the GPS D/ESAM 230, 400, 820 and 8000 Audio Mixers. Implemented advantages of the ESAM-4 protocol over the ESAM-2 protocol include:

  • ·Virtual to Logical machine mapping
  • ·E-MEM-type register transfer (A-MEM)
  • Storage & Recall between the Mixer and Super Edit. Register data can be stored in the EDL · D/ESAM Configuration Saving/Recalling

Graham-Patten D/ESAM 230 Audio Mixer Set-up with ESAM-4
(
55KB, 6 pages)
Document covering the specific set-up of the GPS D/ESAM 230 Audio Mixer using the ESAM IV protocol, allowing Virtual Machine mapping, SWAP and Pre-Read (compares ESAM-2 to ESAM-4 settings).

 

Graham-Patten D/ESAM 230 Audio Mixer with Fastrack VS
(
66KB, 3 pages; (08/16/02))
This document covers the configuration settings for the D/ESAM 230 audio mixer and the suggested settings for the Fastrack VS hybrid editing system.


ESAM II Program bus monitor mode
(
17KB, 1 page)
This document describes a custom interface between Super Edit and the Graham-Patten DESAM mixers using the ESAM II protocol. It allows manually selected sources and fader levels to be previewed/recorded WITH the serially controlled editor selections (both RVTR and MXR OUT are preview monitored).

JL Cooper and MIDI interface adapter

MIDI and the JL Cooper DAFV interface adapter
(
34KB, 4 pages)
The DAFV technical note document covers Super Edit features and parameters pertaining to the use of the “Audio Follow Video Interface” (AFV). This unit allows Super Edit ESAM II protocol to control several MIDI interface audio mixers using the JL Cooper interface adapter (ESAM to MIDI).

Sony MXP-290 and Soundcraft VSA 24 II interface
(
13KB, 3 pages)
Document covering the ESAM-2 (2 channel) protocol used in controlling the MXP-290 audio mixer with the Soundcraft VSA 24 II interface adapter. Document covers setup of MXP-290, VSA 24 II interface and the VPE and DPE editor.

 

Sony MXP-S390
(
14KB, 3 pages)
Document covering the ESAM-2 (2 channel) protocol used in controlling the MXP-S390 audio mixer with the on-board serial interface.

 

 

Soundcraft BVE200 and Soundcraft VSA 24 II interface
(
36KB, 4 pages)
Document covering the various 2 channel protocols (ESAM-1, GVG100/AFV, and AMX-100) used in controlling the Soundcraft BVE200 audio mixer with the Soundcraft VSA 24 II interface adapter. Document covers setup of BVE200, the VSA 24 II interface and the VPE and DPE editor.


Yamaha 03D Audio Mixer Tech Note update ( 361KB, 8 pages)
Editware has a new tech note for the Yamaha 03D audio mixer that goes into more detail in the set up and configuration of the 03D audio mixer. Tech note includes mixer setup, monitoring, editor setup, pre-read operations and scene memories. (12/01/2000)


Yamaha Digital Audio Mixer 03D ( 15KB, 2 pages)
The VPE editing system interfaces to the Yamaha 03D Digital Audio Mixer with a single RS-422 control cable and 03D serial protocol. The 03D must contain the “03D VEK” kit in order to be controlled serially. Click Here to LINK to Yamaha's on-line Startup Guide for setting up the 03D VEK for Video Editing.

PLEASE NOTE: There is a problem with audio Channel 3 & 4 dissolves using the O3D mixer under serial control. If you try to do a dissolve with only channel 3 or 4, or 3 & 4, it will do a cut instead. If your dissolve includes either or both channels 1 and/or 2, it will dissolve just fine. We have confirmed this problem in our lab and believe that Super Edit is sending the correct commands. We are in the process of contacting Yamaha regarding this issue and will post updated information when we have a resolution or more information.


Yamaha 03D Audio Mixer with Fastrack VS ( 383KB, 7 pages; (updated 09/24/02))
This document covers the configuration settings for the Yamaha 03D audio mixer and the suggested settings for the Fastrack VS hybrid editing system.


Zaxcom Arria digital audio mixer

(
42KB, 5 pages)
This document covers Super Edit features and parameters pertaining to the Zaxcom Arria digital mixer protocol (ESAM II -based). More specific Arria set-up is available in the Arria Operations Manual on Zaxcom's website.


Zaxcom Cameo SV digital audio mixer for NLE
( 35KB, 3 pages)
This document covers Super Edit features and parameters pertaining to the Zaxcom Cameo SV digital audio mixer protocol (ESAM II -based) for Super Edit NLE use.

image


image
image