|
VTRs, DDRs, ATRs, etcRs
Accom
RTD ( 20KB, 2 pages)
This is the improved motion control driver for
the Accom RTD real time disk recorder. This driver permits PEGS
speed control in increments of 1% from -999% to 900% of play
speed. Complete setup instructions for the RTD are included in
this document.
Grass Valley Group Profile Media Platform
(18KB,
1 page)
The Super Edit interface to the GVG/Tektronix Profile
has been improved and enhanced to support Profile Software
version 1.4.17. Detailed operation instructions for Super Edit
are given in the Super Edit Operator’s Guide. The Profile
Operations Manual provides excellent information for the Profile.
This note discusses only the new Super Edit/Profile features.
No additional setup is required.
Super Edit NLE Installation & Setup
(216KB, 38 pages;
04/26/99)
Updated configuration for the DPE/VPE and
GVG/Tektronix Profile PDR for use in the NLE mode.
Super Edit NLE Operations
(137KB, 27 pages; 04/26/99)
This document will take you through the operation
of the DPE/VPE in the NLE mode.
Installation & Setup for Profile XP Series MPEG
(66KB, 6 pages; 7/18/2000)
Specific installation/setup for the Profile XP Series
and special considerations in using this versatile video server.
All MPEG-2 configuration files MUST be labelled "M"
in the first letter and an "X" in the second letter
of the Timeline playback (for XP only) to turn off the input
routing capability of the XP channels, even on the playback only
channels.
Installation & Setup for PRO Series MPEG-2 w/External
Switcher
(57KB,
6 pages; 01/24/2000)
Specific setup for using the 2 decoder/1 encoder MPEG-2
PRO Series Profile with an external video switcher.
Installation & Setup for PRO Series MPEG-2 w/Internal
VME Switcher
(52KB,
6 pages; 10/25/1999)
Specific setup for using the 2 decoder/1 encoder MPEG-2
PRO Series Profile with the internal VME video switcher.
Hybrid Editing with
Editware and Profile
DPE and VPE Editing System users who have a Grass Valley Profile
PDR or XP can have the best of two worlds - the ability to edit
with high end online equipment and operate at non-linear speed.
Get the most from your linear equipment, including video switchers,
digital effects, audio mixing consoles, digital VTRs, by adding
a Profile - and if you are not yet using one, a DPE or VPE Editing
system from Editware.
Creating Timecode clips for Mode 1 movies
(29KB, 2 pages; 08/09/2000)
Specific setup for using the 2 decoder/1 encoder MPEG-2
PRO Series Profile with the internal VME video switcher.
JVC BR-D85U ( 17KB,
1 page)
Setup recommendations for the JVC BR-D85U digital-S recorder
with PreRead capability.
 Panasonic DVC Pro
( 19KB, 2 pages)
Setup recommendations for the AJ-D650 AJ-D750and
DVC-Pro VTRs.
 Panasonic AJ-D95
( 25KB, 1 page)
Setup recommendations for the AJ-D95.
 Quickframe
( 28KB,
2 pages)
Settings for the SDL Quickframe digital disk recorder
in the Sony-style VTR emulation mode.
 Sony Betacam
SX: DNW-A75
( 28KB, 2 pages)
Setup recommendations for the DNW-A75 Editing
Recorder/Player, the latest in the Betacam SX product line, features
frame-accurate editing on Betacam SX tape, plus a full range
of Betacam SP® playback capabilities.
 Sony DSR-40 (28KB,
1 page)
Setup recommendations for the DSR-40.
 Sony MAV-555 (39KB,
3 pages)
Operation of the MAV-555 with VPE editors is
similar to a VTR.
On the DPE editors, assigning a MAV-555 protocol to a source
will activate special functionality. Double clicking on the source
in the Mark Table, or selecting the source in the Mark Table
and pressing [ASSGN] on the keyboard, will bring up a Clip selection
dialog.
 Tascam DA-98
( 21KB, 3 pages)
Setup recommendations for the using the DA-98
eight channel digital audio recorder. Includes directions for
implementing 8 channel audio control with the new Super Edit
8 channel audio option (ESAM II required).
 Tascam DA-88 ( 30KB,
5 pages)
Setup recommendations for the using the DA-88
digital audio recorder using the SY-88 Serial Interface.
Tascam DA-60-MKII
( 25KB,
3 pages)
Setup recommendations for the using the DA-60-MKII
digital audio recorder using the SY-D6 Synchronizer Board.
| 
